The modern home decor is inextricably linked to chandelier's installation. Beautiful chandeliers as well as lighting help in decorating the room, and can make the interior look more appealing. While the design and dimensions of the chandelier may differ, the steps to install it are identical.

1. Safety precautions prior to installation

1. Examine the installation setting Use the stylus to test the wiring in the home of the user to determine if the power is working and then examine the wiring in the surroundings.

2. Check if the outer package of the chandelier has been damaged, and then, after opening the package remove the components each one at a time in accordance with the installation instructions, to determine whether the chandelier's body or accessories are missing or damaged If they are, contact customer service for assistance the issue.

3.Get the tools you need to install the chandelier and put them on the mat to keep scratches to the floors of the house where the homeowner lives. Also, place the chandelier along with the chandelier's accessories on a smooth surface (e.g. the foamboard) to avoid scratching your body.

4.Workers have to prepare components prior to the installation of the chandelier including plates, wood strips tools for hardware, screws the hammers, and many other tools are essential.

5.In order to determine the dimensions of the chandelier, identify the precise location of the installation in conjunction with the user. verify whether the direction is close to the hole. As also determining the distance to the hole's location. Try to center the fixture. Also, consideration should be paid to evaluating the capacity to bear load of the place.

2. Installation steps

1.Installation of the base: The base is put in the position that is expected for installation Mark the wall with pencil, then remove off the base and make holes at the mark by using the aid of an electric drill.

Install the expansion bolts that will fix the base into the holes. Pay particular attention to the size of the holes as well as the depth of the buried to ensure that the bolt specifications are met. Then, you can put the base back in the location marked, and then fix it. When drilling, make sure you use the right type for the drill, the depth should be about 4-5 cm, or more, use of a dust cover or a plastic bag on top of the drill bit is recommended to stop dust from flying. If you drill through the wall with the rebar when drilling it, you can alter the angle so that you can continue to drill.

2.Assemble the chandelier. When you are assembling, you should follow the installation directions of the chandelier for assembly and tighten the nuts on each arm one at a to avoid getting loose. Install the lower and upper decorative covers as well as the ceiling discs on the chandelier.

3.Test the pendant light: Install all lighting sources for the pendant light Connect with the test line and test light and repeat the test several times to make sure there's no problem prior to installation. If there's a problem the master must be in contact with the user in the shortest amount of time.

4.Connect the wires to the ceiling tray to the hanging chain. Lift the chandelier to its topline such the incoming line is linked with the line at the top. Then wrap the wire in insulation tape. Tidy the wire and then tuck it in the ceiling tray. Fix the ceiling tray using decorative nuts, if the screws are too long, you may include nuts to tighten the screws. When the chandelier is installed, you have to let the user decide whether the size of your chandelier adequate. Connect the wire from the boom to the wick when the chandelier is controlled by switches, when threading, you must be aware of which direction the lines are running.

5.chandelier wiring: once the installation is completed After that, switch on the light to check whether the chandelier's lighting is normal. This will prevent the lamp shade from being installed and then eliminate the issue identified. When the power is back to normal, you need be sure to shut off the power in order to with the installation of shades for the chandelier and pendant. The actual pendant for each light is different. The arrangement of the fixture can be based on the installation instructions.

3. Inspection after installation

1.Verify that the switch and the control sequence, to ensure that the chandelier is head is fully lit and that the product comes with a segmentation function and you must ensure that the segmentation of the fault-free system, like identified problems should be removed and, if the case where the user's consent, determine the root of the problem.

2.Clean up the area after the installing the chandelier packaging wiring, cleaning up the area after installation and other trash prior to leaving.